View PS2805-1-15_8526043.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r08ds0095ej0400 rev.4.00 page 1 of 14 jan 23, 2013 the mark shows major revised points. the revised points can be easily searched by copying an "" in the pdf file and specifying it in the "find what:" field. data sheet ps2805-1, ps2805-4 high isolation voltage ac input response type ssop photocoupler description the ps2805-1 and ps2805-4 are optically coupled isolators containing gaas light emitting diodes and an npn silicon phototransistor in a plastic ssop for high density applications. this package has shield eff ect to cut off ambient light. features ? high isolation voltage (bv = 2 500 vr.m.s.) ? small and thin package (4,16-pin ssop, pin pitch 1.27 mm) ? high collector to emitter voltage (v ceo = 80 v) ? ac input response ? high-speed switching (tr = 3 s typ., tf = 5 s typ.) ? ordering number of tape product: ps2805-1-f3, ps2805-4-f3 ? pb-free product ? safety standards ? ul approved: no. e72422 ? bsi approved (bs en 60065, bs en 60950) ? csa approved: no. ca 101391 (ca5a, can/csa-c22.2 60065, 60950) ? din en 60747-5-5 (vde 0884-5) approved (option) applications ? programmable logic controllers ? measuring instruments ? hybrid ic r08ds0095ej0400 rev.4.00 jan 23, 2013 1. anode, cathode 2. cathode, anode 3. emitter 4. collector 43 12 anode, cathode cathode, anode emitter collector 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. 12345678 16 15 14 13 12 11 10 9 ps2805-4 ps2805-1 (top view) pin connection
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 2 of 14 jan 23, 2013 package dimensions (unit: mm) m 0.12 0.40.1 1.27 2.00.1 0.10.1 ps2805-1 ps2805-4 4.4 7.00.3 0.50.3 0.15 +0.10 ?0.05 2.70.3 10.30.3 4.4 7.00.3 0.50.3 0.15 +0.10 ?0.05 1.27 2.0 +0.3 ?0.2 0.10.1 m 0.12 0.40 +0.10 ?0.05 photocoupler construction parameter unit (min.) air distance 4.5 mm outer creepage distance 4.5 mm inner creepage distance 2.5 mm isolation distance 0.1 mm
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 3 of 14 jan 23, 2013 marking example ps2805-1 made in taiwan made in japan " " (square) :made in japan week assembled year assembled (last 1 digit) last 1 number of type no. : 5 assembly lot 301 r5 301 r5 301 company initial ps2805-4 country assembled assembly lot no. 1 pin mark ps2805-4 nl301 r 3 01 year assembled (last 1 digit) l n rank code in-house code (l: pb-free) week assembled
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 4 of 14 jan 23, 2013 ordering information part number order number solder plating specification etc. packing style safety standard approval application part number *1 ps2805-1-f3 ps2805-1-f3-a embossed tape 3 500 pcs/reel standard products (ul, bsi, csa approved) ps2805-1-v-f3 ps2805-1-v-f3-a embossed tape 3 500 pcs/reel din en 60747-5-5 (vde 0884-5) approved (option) ps2805-1 ps2805-4-f3 ps2805-4-f3-a embossed tape 2 500 pcs/reel standard products (ul, bsi, csa approved) ps2805-4-v-f3 ps2805-4-v-f3-a pb-free embossed tape 2 500 pcs/reel din en 60747-5-5 (vde 0884-5) approved (option) ps2805-4 note: *1. for the application of the safety st andard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) ratings parameter symbol ps2805-1 ps2805-4 unit forward current (dc) i f 50 ma/ch power dissipation derating p d / c 0.6 0.8 mw/ c power dissipation p d 60 80 mw/ch diode peak forward current *1 i fp 1 a/ch collector to emitter voltage v ceo 80 v emitter to collector voltage v eco 6 v collector current i c 50 ma/ch power dissipation derating p c / c 1.2 mw/ c transistor power dissipation p c 120 mw/ch isolation voltage *2 bv 2 500 vr.m.s. operating ambient temperature t a ? 55 to +100 c storage temperature t stg ? 55 to +150 c notes: *1. pw = 100 s, duty cycle = 1% *2. ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1-2 shorted together, 3-4 shorted together (ps2805-1). pins 1-8 shorted together, 9-16 shorted together (ps2805-4).
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 5 of 14 jan 23, 2013 electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit forward voltage v f i f = 5 ma 1.1 1.4 v diode terminal capacitance c t v = 0 v, f = 1.0 mhz 30 pf transistor collector to emitter dark current i ceo v ce = 80 v, i f = 0 ma 100 na current transfer ratio (i c /i f ) *1 ctr i f = 5 ma, v ce = 5 v 80 600 % ctr ratio *1 ctr1/ ctr2 i f = 5 ma, v ce = 5 v 0.3 1.0 3.0 collector saturation voltage v ce (sat) i f = 10 ma, i c = 2 ma 0.3 v isolation resistance r i-o v i-o = 1.0 kv dc 10 11 isolation capacitance c i-o v = 0 v, f = 1.0 mhz 0.4 pf rise time *2 t r 3 fall time *2 t f 5 turn-on time *2 t on 6 coupled turn-off time *2 t off v cc = 5 v, i c = 2 ma, r l = 100 5 s notes: *1. ctr1 = i c1 /i f1 , ctr2 = i c2 /i f2 i c1 i c2 v ce i f1 i f2 *2. test circuit for switching time i f pulse input v cc 50 r l = 100 v out pw = 100 s duty cycle = 1/10 input output 90% 10% t r t d t f t s t on t off
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 6 of 14 jan 23, 2013 typical characteristics (t a = 25 c, unless otherwise specified) 25 50 75 100 ps2805-4 ps2805-1 0.8 mw/?c 0.6 mw/?c 25 50 75 100 100 80 60 40 20 0 ambient temperature t a (?c) diode power dissipation p d (mw) diode power dissipation vs. ambient temperature ps2805-1 ps2805-4 1.2 mw/?c ambient temperature t a (?c) transistor power dissipation p c (mw) transistor power dissipation vs. ambient temperature 120 100 80 60 40 20 0 0.1 5 50 1 10 100 0.5 0.7 0.9 1.1 1.4 0.8 1.0 1.2 1.3 1.5 forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage t a = +100?c +60?c +25?c 0?c ?25?c ?55?c 100 10 000 1 000 10 1 ?50 ?25 0 100 25 50 75 collector to emitter dark current i ceo (na) ambient temperature t a (?c) collector to emitter dark current vs. ambient temperature v ce = 80 v 40 v 24 v 10 v 5 v ?1.0 ?1.5 0 ?0.5 0.5 1.5 1.0 80 ?40 ?80 ?60 0 ?20 40 20 60 forward current i f (ma) forward voltage v f (v) forward current vs. forward voltage 1 ma i f = 50 ma 20 ma 10 m a 5 m a 2 ma 1 10 40 5 0.5 0.1 0.0 0.2 1.0 0.4 0.6 0.8 collector saturation voltage v ce(sat) (v) collector current i c (ma) collector current vs. collector saturation voltage remark the graphs indicate nominal characteristics.
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 7 of 14 jan 23, 2013 normalized to 1.0 at t a = 25?c, i f = 5 ma, v ce = 5 v ?50 0 100 ?25 25 50 75 0 0.6 1.2 0.2 0.4 1.0 0.8 ambient temperature t a (?c) normalized current transfer ratio ctr normalized current transfer ratio vs. ambient temperature t f t s t r t d v cc = 5 v, i c = 2 ma, ctr = 236% 0.01 0.05 0.1 0.5 1 510 0.1 100 50 10 5 1 0.5 load resistance r l (k ) switching time t ( s) switching time vs. load resistance v cc = 5 v, i f = 5 ma, ctr = 236% t f t s t d t r 1 10 100 0.1 1 10 100 1 000 load resistance r l (k ) switching time t ( s) switching time vs. load resistance 70 0 50 60 30 40 10 20 4 2 8 6 10 collector to emitter voltage v ce (v) collector current i c (ma) collector current vs. collector to emitter voltage 5 ma i f = 50 ma 10 ma 20 ma 0.02 100 0.1 1.0 10 100 200 50 150 250 300 forward current i f (ma) current transfer ratio ctr (%) current transfer ratio vs. forward current v ce = 5 v, n = 3 sample a b c frequency response frequency f (khz) normalized gain gv ?10 ?20 ?15 0 ?5 0.5 2 10 20 500 1 5 50 100 200 i f = 5 ma, v ce = 5 v r l = 1 k 100 300 remark the graphs indicate nominal characteristics.
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 8 of 14 jan 23, 2013 taping specifications (unit: mm) outline and dimensions (reel) packing: 3 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 tape direction ps2805-1-f3 outline and dimensions (tape) 1.550.1 4.00.1 2.00.1 4.00.1 1.750.1 2.8 max. 7.550.1 0.3 7.50.1 16.00.3 2.850.1 2.30.1 1.5 +0.1 ?0 3302.0 1001.0 2.0 0.5 15.9 to 19.4 outer edge of flange 21.51.0 17.51.0 301 r5 301 r5 301 r5 301 r5 301 r5
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 9 of 14 jan 23, 2013 tape direction ps2805-4-f3 outline and dimensions (reel) packing: 2 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 outline and dimensions (tape) 1.550.1 12.00.1 2.00.1 4.00.1 1.750.1 16.00.3 8.30.1 2.8 max. 10.70.1 0.3 2.30.1 7.50.1 1.5 +0.1 ?0 3302.0 1001.0 2.0 0.5 15.9 to 19.4 outer edge of flange 21.51.0 17.51.0
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 10 of 14 jan 23, 2013 recommended mount pad dimensions (unit: mm) 0.8 1.27 1.45 6.25 remark all dimensions in this figure must be evaluated before use.
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 11 of 14 jan 23, 2013 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temp erature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 12030 s (preheating) 220 c 180 c package surface temperature t ( c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260 c max. 120 c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron ? peak temperature (lead part temperature) 350 c or below ? time (each pins) 3 seconds or less ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 12 of 14 jan 23, 2013 2. cautions regarding noise be aware that when voltage is applied suddenly between the photocoupler?s input and output or between collector- emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. measurement conditions of current transfer ratios (ctr), which differ according to photocoupler check the setting values before use, since the forward current conditions at ctr measurement differ according to product. when using products other than at the specified forwar d current, the characteristics curves may differ from the standard curves due to ctr value variations or the like. this tendency may sometimes be obvious, especially below i f = 1 ma. therefore, check the characteristics unde r the actual operating conditions and thoroughly take variations or the like into consideration before use. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high temperature and high humidity.
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 13 of 14 jan 23, 2013 specification of vde marks license document parameter symbol spec. unit climatic test class (iec 60068-1/din en 60068-1) 55/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, procedure a for type test and random test) u pr = 1.6 u iorm , p d < 5 pc u iorm u pr 705 1 128 v peak v peak test voltage (partial discharge te st, procedure b for all devices) u pr = 1.875 u iorm , p d < 5 pc u pr 1 322 v peak highest permissible overvoltage u tr 6 000 v peak degree of pollution (din en 60664-1 vde0110 part 1) 2 comparative tracking index (iec 60112/din en 60112 (vde 0303 part 11)) cti 175 material group (din en 60664-1 vde0110 part 1) iii a storage temperature range t stg ? 55 to +150 c operating temperature range t a ? 55 to +100 c isolation resistance, minimum value v io = 500 v dc at t a = 25 c v io = 500 v dc at t a max. at least 100 c ris min. ris min. 10 12 10 11 safety maximum ratings (maximum permi ssible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = tsi tsi isi psi ris min. 150 300 500 10 9 c ma mw
ps2805-1, ps2805-4 e r08ds0095ej0400 rev.4.00 page 14 of 14 jan 23, 2013 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposi ng of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subjec t to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth.
all trademarks and registered trademarks are t he property of their respective owners. c - 1 revision history ps2805-1, ps2805-4 data sheet description rev. date page summary 1.00 mar 31, 2003 ? this data sheet was released as pn10253ej01v0ds 4.00 jan 23, 2013 throughout renesas fo rmat is applied to this data sheet. p.1 the ordering number and safety standards are revised. p.2 photocoupler construction is added as each distance of this device. p.3 the explanation in marking example is revised. p.4 ordering information is modified with the revision of the safety standards. p.5 turn-on time (t on ) and turn-off time (t off ) are added to the table in electrical characteristics. the switching time chart is added to the notes in electrical characteristics. p.6 the graph of long term ctr de gradation is deleted from those in typical characteristics. p.8 ps2805-1-f4 is deleted form tape direction image in taping specifications. p.9 ps2805-4-f4 is deleted form tape direction image in taping specifications. p.10 recommended mount pad dimensions is added. p.11 the note about temperature condition of the recommended soldering conditions is deleted. p.12 programme logic cont rollers example is deleted. p13 specification of vde marks license document is added.
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information incl uded herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". t he recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat t o human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you mus t check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas e lectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have s pecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance desig n. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics produc t, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measu res. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatib ility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, in cluding without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufactu re, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this do cument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or othe rwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by yo u or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesa s electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this doc ument or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-o wned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. htt p ://www.renesas.co m refer to "htt p ://www.renesas.com/" for the latest and detailed information . california eastern laboratories , inc. 4590 patrick henr y drive, santa clara, california 95054, u.s.a . tel: +1-408-919-2500, fax: +1-408-988-0279 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-651-700, fax: +44-1628-651-804 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 204, 205, azia center, no.1233 lujiazui ring rd., pudong district, shanghai 200120, china tel: +86-21-5877-1818, fax: +86-21-6887-7858 / -7898 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 80 bendemeer road, unit #06-02 hyflux innovation centre singapore 339949 tel: +65-6213-0200, fax: +65-6213-0300 renesas electronics malaysia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics korea co. , ltd . 11f., samik lavied' or bld g ., 720-2 yeoksam-don g , kan g nam-ku, seoul 135-080, korea tel: +82-2-558-3737 , fax: +82-2-558-514 1 s ale s o ffi c e s ? 2012 renesas electronics corporation. all ri g hts reserved . [ colo p hon 2.2 ]

▲Up To Search▲

Price & Availability of PS2805-1-15

	To Download PS2805-1-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .